StorageWorks Dual Speed CD-ROM Drive
2–18
Order Number: EK–SM1RC–UG. B01
Figure 2–20. I/O Module Connectors and SCSI Address Switches
11. Insert the mounted second device into the bottom cover guide slots (Figure 2–17).
NOTE
The second connector is positioned in the slot to the left of the
first connector.
12. Position the bottom of the SBB/backplane connector into the receptacle in the
bottom cover as shown in Figure 2–21. The top cover has a similar receptacle for the
top of the SBB/backplane connector.
13. As you align the top and bottom covers, make sure that both SBB/backplane
connectors move freely up, down, and sideways.
14. Push the top cover into the bottom cover until the eight tabs on the sides of the
covers engage and snap into place.
