Digital Equipment STARION 200i, Service Maintenance Manual

Page: 21 / 96

Digital STARION 200i/300i PC Utilities & Configuration
MCS Logistics Engineering - Nijmegen 21
S
T
A
R
I
O
N
2
0
0
i
3
0
0
i
Windows Video Drivers
The computer comes with the required Windows video display driver pre-installed at the factory.
However, if the hard disk drive becomes corrupted, you might need to re-load the Windows video driver
that has been provided on the Windows video driver diskette that is made using "Program Disks" and the
"Driver Disks" tab from Digital Getting Started..
Before installing a video device driver, read the information in the README.TXT file provided on the
diskette.
To re-load the Windows driver, perform the following steps:
1) Type CD WINDOWS at the C:\> prompt, then press [Enter].
The following prompt appears: C:\WINDOWS>.
2) Type SETUP and press [Enter].
The computer displays the SETUP screen.
3) Select the
Display
option and press [Enter].
4) Toggle through the Display option to select the appropriate Windows 3.x driver.
5) Select the desired video resolution then press [Enter].
6) If the appropriate video driver resides on a separate diskette, toggle through the
Display
option to
select Other (Requires disk provided by hardware manufacturer).
7) Insert the diskette that contains the appropriate video driver and press [Enter].
Select the desired video resolution then press [Enter].
The MS-DOS prompt appears when SETUP completes.
8) Type WIN and press [Enter] to start Microsoft Windows.
MS-DOS Application Video Drivers
Various software drivers for popular MS-DOS based CAD and business applications have been provided
on the "S3 TRIO 32 Video Drivers and Utilities" diskette that is made using the "Driver Disks" section of
"Getting Started". When using an older non-Windows application such as ACAD or Lotus for DOS,
loading one or more of these drivers may be necesarry.
Before installing a video device driver, read and understand the information in any README.TXT file
provided on the diskette.