Prioris MX 6200 Server PowerGrade
13
Reset the Switches on the Main Logic Board
Make sure that the following switches/jumpers are set to prevent any
unauthorized update to your BIOS.
SW1-1 Off
BIOS upgrade
Disabled
SW1-3 Off
Boot block update
Disabled
Install the CPU Module
1. Install the CPU module into the CPU slot on the main logic board.
2. Secure the CPU module to the main logic board using the previously
removed retaining bracket, screw, and a Phillips screwdriver (Figure 9).
Install any Video Option Card
If you previously removed a video option card, you can install it again.
Replace the Panel and Reconnect the Cables
1. Install the left side panel and lock the server. The server will not power up
with the side panel removed.
2. Connect any cables and power cords previously removed to the back of
the server.
Summary of Contents for Prioris MX 6200
Page 6: ...vi...
