Digital Equipment HiNote VP 700 Series, Service Quick Reference Manual

Page: 121 / 149

FRU Replacement
5-12
Removing Memory Modules (DIMMs)
CAUTION:
It is important to discharge the
static electricity from your body before
handling the DIMMs. Discharge your body’s
electricity by touching the metal shielding
around the ports on the rear of the notebook
computer for approximately five seconds.
To remove the memory modules:
1. Turn off the notebook, disconnect the AC cord and any
connected peripherals and remove the battery.
2. The memory door is located on the underside of the
notebook. To release the door, remove the Phillips
head screw securing the HDD module (Figure 5-5, step
1).
3. Gently pull the HDD module about one inch from it
housing to release the memory cover (Figure 5-5, step
2).
4. Remove the memory door to reveal the DIMM slots
(Figure 5-5, step 3).