Digital Equipment EtherWORKS Turbo PCI, User Information

Page: 22 / 48

Table 2–2 EtherWORKS
Turbo PCI Option Settings
This setting . . . Allows you to . . .
EtherWORKS Turbo PCI
Requirements
Enable/disable
device Individually enable or
disable each PCI slot. PCI slot must be enabled.
IRQ Individually set an IRQ
default for each PCI slot
(none, IRQ 5, 9, 10, 14,
or 15). IRQ 5, 9, 10, 14, or 15.
Enable master Enable bus mastering on
a PCI slot. PCI slot must be enabled
for bus mastering.
1
Latency timer Set the PCI latency
timer (in PCI clocks) for
each PCI device. All settings supported.
1
Some PCI computers have a slot that does not support bus mastering. Make sure
the EtherWORKS Turbo PCI board is installed in a PCI slot that has bus mastering
capabilities.
Running Setup
To run the BIOS Setup utility, use the following procedure:
1. Power on your computer and allow the power-on self-test (POST)
to complete.
2. Make note of any configuration errors listed, then press
F1
to
display the setup screens.
3. Follow the instructions on your screen, or from any on-line help
pop-up screens, to configure your computer.
2–8