Digital Equipment EtherWORKS Turbo PCI, User Information

Page: 18 / 48

Installing the Board
The EtherWORKS Turbo PCI board has bus mastering support for
high performance operation. Refer to your computer documentation
to choose a bus-mastering PCI slot on your system. Then use the
following procedure to install the EtherWORKS Turbo PCI board.
1. Set all power switches (system and peripherals) to the off position.
2. Unplug the power cord from the wall socket, then disconnect the
cord from the system unit. Unplug any external devices.
3. Remove the computer cover(s) to access the PCI slots.
4. Unscrew and remove the system’s option slot cover from an
available PCI slot that supports bus mastering (Figure 2–2).
5. Insert the EtherWORKS Turbo PCI board into the slot, then push
firmly into place (Figure 2–3).
6. Replace the screw to secure the board.
7. Replace the computer cover(s).
8. Connect the power cord to the system unit, then plug the power
cord into the wall outlet. Reconnect any external devices.
9. Power on the system and peripherals.
2–4