Diagnostics and Software Installation
3–3
EEPROM Diagnostics
Select the Diagnose EEPROM option from the 1Step Main Menu to run
read/write tests on each register in the EEPROM.
Network Diagnostics
Select the Run Diagnostics on the Network option from the 1Step Main Menu
to verify the adapter’s ability to communicate with another device on the
network. Set up at least one computer as a Responder and one as an Initiator.
The Responder displays the status of communications with each Initiator on the
network; the Initiator displays the current Responder and the status of
corresponding communications.
Software Information
The EtherWORKS ISA PnP 10 distribution diskette contains device driver
software and installation information. If your network operating system runs
under DOS, use 1Step to install the corresponding driver. The RELEASE.TXT
file located in the diskette’s root directory provides information about the
diskette’s contents. Enter the
DOS TYPE
command to check the contents of this
file.
For other network operating systems, the utility provides instructions on how to
install the required drivers by referring you to the appropriate subdirectories.
Read the *.TXT files in each subdirectory for the latest changes and detailed
driver installation instructions. Press the F1 key for online help when installing
drivers for other network operating systems.
