Hardware Installation and Configuration
2–3
LEDs
The link LED (LNK
) lights when a valid link pulse is established during
normal operation. If no data or link pulses are detected, the LED does not light,
indicating a failed status (refer to Appendix A for troubleshooting information).
___________________________Note _____________________
The link LED is insensitive to the status of AUI or BNC
connections. Use the 1Step utility to check these connections. (See
the Diagnostics section in Chapter 3 for more information.)
_____________________________________________________
The activity LED (ACT
) lights when data is transmitted or received over the
network.
Hardware Installation
To install the DE305 in your system, use the following procedure:
1. Unplug the computer.
2. Disconnect all cables that are connected to the main system unit.
3. Remove any diskettes from the diskette drive.
4. Remove the computer cover.
5. Unscrew and remove the option slot cover from the 16-bit ISA slot you plan
to use.
6. Install an optional boot ROM on the adapter (see the Optional Remote Boot
ROM section in this chapter).