Hardware Description
2–6
Full
²²
Duplex Status (Full Duplex)
The following table describes the full
²duplex status LEDs when communications have been
set to this mode for the indicated port:
LED Activity
Condition
Indication
Steady light
ON
Port is set for full
²duplex operation
No light
OFF
Port is set for half
²duplex operation
Select/Link Status (Select/Link)
The following table describes the Select/Link status LEDs during a valid network
connection associated with the port:
LED Activity
Condition
Indication
Steady light
ON
Valid link has been established on this port
No light
OFF
No valid link has been established on this port
__________________________ Note _____________________________
If the Select/Link LED does not light when a device is connected to its
corresponding port, make sure that both the DEL8X and the connected device
are powered on. Verify that the cable length (standard, straight–through cable)
does not exceed 100 meters. Use crossover cables only if no crossover
²wired (x)
port is available to cascade switches.
____________________________________________________________