Cabling (continued)
DECserver 900TM
9
Table 2 describes the cable connections that are compatible with the DECserver 900TM
Ethernet and serial line connectors. Wiring diagrams of individual cables are shown on
page 11.
H8584ĆAC MP8 to MMJ adapter
Use this adapter to convert a serial port to
a DECserver 300 terminal server configuĆ
ration.
Use this office cable to connect from the
6Ćpin MMJ port of a terminal or printer to
the 8Ćpin MJ faceplate data connector.
The BN24H is configured with one 6Ćpin
modified modular plug, one standard
8Ćpin plug, and crossover wiring.
BN24H MP8 to MP6 office cable
H8585ĆAB
1
MJ8 to DB25 (male)
modem adapter
H8585ĆAC
1
MJ8 to DB25 (male)
modem adapter
BN25G MP8 to MP8 equipment cable
Use this cable as either a patch cord or
office cable. It is configured with stanĆ
dard 8Ćpin modular plugs, which connect
four unshielded twisted pairs pinĆtoĆpin.
1
Adapters H8585ĆAB and H8585ĆAC are not for connection to public works in Sweden, Germany, or Japan.
H8585ĆAA MJ8 to DB9 (female)
nullĆmodem adapter
Use this adapter with the BN25G cable to
convert the DECserver 900TM connector to
the DB9 connector for cabling to PC asynchĆ
ronous ports.
Use this adapter with the BN25G cable to
connect lowĆspeed modems to the DECservĆ
er 900TM.
Before connecting cables to the DECserver 900TM ports, you must verify supported modem
signals with the person managing the DECserver 900TM. This information is necessary to
determine what cables to use. For more information on the signals, refer to the
Network
Access Server Management manual.
Use this adapter with the BN25G cable to
connect highĆspeed modems to the DECĆ
server 900TM.
