Installing Flash RAM
6 DECserver 900TM
LKG–8091-93I
If you using a Flash RAM card for loading the operational software, perform the following:
a. The Digital label should be on the same side as the DECserver 900TM logo on
the front panel of the module.
b. When properly inserted, the Flash RAM card protrudes from the front panel about 1/4 inch.
The Flash RAM card is keyed and cannot be inserted improperly.
The Flash RAM card can be hot swapped and may be inserted or removed at anytime. If you are boot-
ing from the Flash RAM card, insert it before powering the module or during the self-test phase.
Once you boot the DECserver 900TM, the card may be left in place or removed.
Insert the Flash RAM card into the Flash RAM slot on the front of the module.
