Digital Equipment DECserver 700-08, Hardware Owner'S Manual

Page: 61 / 77

6–1
6
Replacing and Adding Flash RAM
This chapter shows how to replace or update a DECserver 700 Flash RAM Card.
NOTE
Electrostatic Discharge (ESD) can cause failure of elec-
tronic components and can reduce the long term reli-
ability of the DECserver 700. Digital Equipment
Corporation recommends you use the anti-static kit
(Part No. 29-26246-00) or ESD wrist strap (Part No.
12-36157-01) when installing a Flash RAM Card.
6.1 Replacing or Adding Flash RAM
To replace or install the Flash RAM Card:
1. Disconnect all cables from the DECserver 700.
2. Remove the DECserver 700 brackets, if fitted (Figure 5–1).
3. Remove the DECserver 700 cover (Figure 5–2).
4. Fit the anti-static kit (Figure 5–3).
5. Locate the Flash RAM connector or remove the faulty Flash RAM Card
(Figure 6-1).