Choose an option,
then go to the section
titled Description of
Menu Options.
If you need to assign
an IP address to the
module, choose this
option.
22
DECrepeater 90FS Installation and Configuration
Configuring the Module (Cont.)
DECrepeater 90FS Installation Menu (DEChub 90/Standalone
Options)
This section lists the options available from the
DECrepeater 90FS
INSTALLATION MENU
when the module is installed into a DEChub 90 or as a
standalone unit.
The following is an example of the
DECrepeater 90FS INSTALLATION MENU:
DECrepeater 90FS
DECrepeater 90FS INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Set SNMP Read/Write Community
[5] Add SNMP Trap Addresses
[6] Delete SNMP Trap Addresses
[7] Dump Error Log
[8] Set In-Band Interface IP Address
[9] Set In-Band Interface Default Gateway Address
[10] Downline Upgrade
[11] Set Out-of-Band Management (OBM)Interface IP Address
[12] Set Out-of-Band Management (OBM) Port Speed
[13] Module-Specific Options
Enter selection : 1
Return
Summary of Contents for DECrepeater 90FS
Page 78: ......
