The OBM port speed you
select must match the speed
of your OBM port device.
DECrepeater 90FS Installation and Configuration
43
Configuring the Module (Cont.)
[12] Set OBM Port Speed
NOTE:
This selection is operational only when the module is
installed into a DEChub 90 or in standalone mode.
This option prompts you to select and enter the speed of your out-of-band
management port.
NOTE:
The port speed at each end of the communications link
must be identical.
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 12
DECrepeater 90FS
SET OUT-OF-BAND (OBM) PORT SPEED
[1] 1200 baud
[2] 2400 baud
[3] 4800 baud
[4] 9600 baud
[5] 19200 baud
[6] 38400 baud
Enter selection [2] (9600) : 2
Return
OBM port speed set.
Press Return for Main Menu ...
NOTE:
The front-panel serial port, when used for OBM,
supports only 9,600 baud or higher speed modems.
Summary of Contents for DECrepeater 90FS
Page 78: ......
