Upgrade Procedure
Step 7:
Remove SPXgt
Graphics
Module
If your system has an SPXgt graphics module, you must remove
it before you can remove the removable-media device from the
system unit. If you do not have an SPXgt graphics module, go to
step 8.
Figure 2–1 SPXgt 24-Plane Graphics Module
MLO-012647
RFI Gasket
To remove the graphics module:
1.
Remove the plastic E-clip
!
that holds the graphics module
to the frame buffer. (See Figure 2–2.)
2.
Lift the frame buffer from the center connector
"
, then free
it from the ridge
#
on the disk drive H-bracket. Gently work
the frame buffer free by pulling up from the center of the
module.
3.
Pull the frame buffer out of the RFI gasket (shown in
Figure 2–1). The gasket will remain in place, held by the
video connector bracket on the graphics module.
2–6 Upgrading a VAXstation 4000 Model 90/90A
