-5-
5) Insert the FDD unit into the
PL. Be sure the connectors of
the PL and the FDD unit are
securely connected.
Attach the FDD unit to the PL
using the FDD unit's four (4)
attachment screws.
The necessary torque is 0.5 to
0.6N•m.
6) This includes the two (2) PL
bottom face attachment
screws.
The necessary torque is 0.5 to
0.6N•m.
Even after the unit is securely attached to the PL, part of the
unit will extend out from the PL.
Bottom face screws
