-1-
• Be sure to confirm that the PL unit’s power cord is disconnected prior to install-
ing the FDD unit, in order to prevent electrical shock.
• Do not attempt to modify the FDD unit, due to the danger of fire or electrical
shock.
• Prior to installing the FDD unit, be sure to read section "2. Installation” com-
pletely to insure that this unit is correctly installed.
• The PL is not appropriate for use with aircraft control devices, aerospace equip-
ment, central trunk data transmission (communication) devices, nuclear power
control devices, or medical life support equipment, due to these devices inher-
ent requirements of extremely high levels of safety and reliability.
• When using the PL with transportation vehicles (trains, cars and ships), disas-
ter and crime prevention devices, various types of safety equipment, non-life
support related medical devices, etc. redundant and/or failsafe system de-
signs should be used to ensure the proper degree of reliability and safety.
The PL-FD510 is an internally mounted 3.5 inch floppy disc drive unit, designed
for use with Proface’s Panel Computer, PL-5910 Series Units, hereafter referred
to as the “PL.”
Corresponding Product : PL-5910 Series Units
All product names used in this document are the trademarks of their respective
manufacturers.
Pro-face : Digital Electronics Corporation
PL-FD510
Installation Guide
WARNINGS
To prevent this unit from malfunctioning :
• Since the FDD unit is a precision instrument, be sure that it is neither hit by nor
pressed strongly against another object.
• Be sure that water, liquids, or metal particles are not allowed to contact or
enter this unit. Either of these may cause either a breakdown or an electrical
shock.
• Do not install or operate this unit in a location where there is direct sunlight,
excessive heat, dust or vibration.
• Do not store or operate this unit near chemicals, or where there are chemical
fumes.
• To prevent damage to file data, be sure to shut down the PL unit's OS before
turning OFF the main power.
Unit Disposal :
•
When this product is disposed of, it should be done so according to your
country's regulations for similar types of industrial wastes.
