manualshive.com logo in svg

DIGITAL DELAY Mega 475, Instruction Manual

Share
Download
DIGITAL DELAY Mega 475 Instruction Manual Download Page 30

- 30 - 

 

In P.B. Mode 1 only Push-button 1 is used to apply 

the Transbrake.  Every time the button connected to the P.B. 
1 input is pressed, the transbrake solenoid is applied and the 
Cross time (dial-in diff Delay 1) is reset to the 
starting point.  When the button is released the delay time 
starts counting down.  If the button is pressed and released 
again before the Transbrake releases the Mega 475 will 
restart the full delay sequence again.  This can be very 
helpful if you flinch and let go of the push-button before the 
tree comes on. 
 
 

In P.B. Mode 2 Push-button 1 and Push-button 2 can 

be used to apply the Transbrake.  P.B. 1 is used to control the 
Cross time (dial-in diff Delay 1) and P.B. 2 to 
control Delay 2.  If you flinch, either timer can be reset just 
like P.B. Mode 1, with P.B. 1 restarting the Delay 1 time and 
P.B. 2 restarting the Delay 2 time. 
 
 

In P.B. Mode 3 only Push-button 1 is used to apply 

the Transbrake.   When the button connected to the P.B. 1 
input is pressed, the transbrake solenoid is applied and the 
Cross time (dial-in diff Delay 1) is reset to the 
starting point.  When the button is released the Cross time 
starts counting down.  If the button is pressed again the 
Delay 2 time is reset to the starting point.  When the button 
is released the second time the Delay 2 time starts counting 
down.  Whichever timer reaches zero first releases the 
Transbrake solenoid and generates a How Late time. 
 

If you flinch, you can’t restart Cross time.  This 

means if you let go of the push-button before tree comes on 
you will red light.  This is the only drawback to using one 
button for two shots at the tree. 
 
 

In P.B. Mode 4 only Push-button 1 is used to apply 

the Transbrake.   When the button connected to the P.B. 1 
input is pressed, the Transbrake solenoid is applied and the 

Summary of Contents for Mega 475



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands