DIGITAL DELAY Elite 95 Manual Download Page 1

 

 

2036 Fillmore Street 

Davenport, Ia. 52804 

563-324-1046 

www.racedigitaldelay.com

 

 

  

 

 

 

 

Elite 95 

 

 

WARRANTY AND DISCLAIMER 

 

 

DIGITAL DELAY ELECTRONICS INC. WARRANTS THE PRODUCTS IT 

MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP 
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT, 
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED, 
AND USED UNDER PROPER CONDITIONS.  

The company’s liability under this limited warranty shall extend only to the 

repair or replacement of a defective product, at the company’s option. DIGITAL DELAY 
ELECTRONICS INC. disclaims all liability for any affirmation, promise, or representation 
with respect to the products. 

The customer agrees to hold DIGITAL DELAY INCORPORATED and 

DIGITAL DELAY ELECTRONICS INCORPORATED harmless from, defend, and 
indemnify DIGITAL DELAY INC. and DIGITAL DELAY ELECTRONICS INC. against 
damages, claims, and expenses arising out of subsequent sales of or use of DIGITAL 
DELAY ELECTRONICS INC. products, or products containing components 
manufactured by DIGITAL DELAY ELECTRONICS INC. and based upon personal 
injuries, deaths, property damage, lost profits, and other matters which BUYER, its 
employees, or sub-contractors are or may be to any extent liable, including without 
limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and 
liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-
637), as now in effect or as amended hereafter. 
 

No warranties expressed or implied, are created with respect to the company’s 

products except those expressly contained herein.  The customer acknowledges the 
disclaimers and limitations contained and relies on no other warranties or affirmations. 

Summary of Contents for Elite 95












Reviews: