background image

6

Pre-installation Considerations

Establish a site installation plan based upon desired interior coverage area 

x

The inside and outside antennas must have a separation distance of 25 feet or 
greater and must be separated by an exterior wall. The outside antenna must be in 
a vertical position and the inside antenna (plastic side) must face away from the 
outside antenna.  

x

Identify the outside antenna location in the highest, secure, unobstructed area. On 
an RV the antenna can be attached to the back ladder. On a boat or RV, the 
outside antenna’s white fiberglass portion should be mounted clear of metal 
objects, 3’ from other antennas and as high as possible. 

x

For maximum coverage the location of the indoor antenna should have a direct 
line-of-site to as much of the coverage area as possible. Never turn the repeater 
on without antennas and cables securely attached.

x

Based upon the desired interior coverage area, choose a central location for the 
DA4000SBR repeater unit within 6’ of a 12VDC power receptacle. If the location 
of the DA4000SBR unit is not mounted within reach of the supplied 50’ cable, a 
25’ extension cable and 75’ or 100’ replacement cables are available (sold 
separately). The DA4000SBR unit is not waterproof and must be mounted in a 
dry location.

c. ELECTRICAL POWER

WARNING!

Only the provided power cable is to be used with the DA4000SBR system. 
Using any other power cables will harm the DA4000SBR 
amplifier/repeater unit, can be detected and voids the warranty.  

The 12 VDC power supply, PN DP515, has a micro-processor controller to turn 
the repeater off if not properly installed. If a red flashing light appears on the 
power supply, relocate the inside and outside antennas until the power supply has 
a constant green light. The power supply can be reset by unplugging the cigarette 
adapter from the power source.  

INTERNAL DIRECTIONAL ANTENNA LOCATION OPTIONS

WALL FLUSH MOUNT

Facing forward 

CORNER MOUNT

Facing diagonally 

CEILING MOUNT

Facing down 

Boosted Cell Signal

B

o

o

st

e

d

C

el

lS

ig

n

al

Bo

os

ted

Ce

ll S

ign

al

2006 Digital Antenna Inc.

Summary of Contents for PowerMax 4KSBR-50M














Reviews: