Digistor CItadel, User Manual

Page: 7 / 48

2.2. 2.5-INCH SATA SSD
1. Insert the Citadel SSD into an open 2.5-inch drive bay in your computer (Figure 1). Then secure the
Citadel SSD with four screws (Figure 2) or via the computer chassis' built-in tension clip.
1 2
2. Attach a SATA power connector from your computer to the SATA power port on the rear of the Citadel
SSD.
3. Attach a SATA data cable to the SATA port on the rear end of the Citadel SSD and the other end to the
computer's motherboard.
The Citadel SSD must now be activated. Please continue to the next section (see Section 3: Activate the
Citadel SSD, page 8 ).
Citadel SSD User Manual 7