DG-HR3420 User Manual
29
Here is the description of every setup item:
Parameter
Description
PIN Code
Enter the Pin code – Check with 3G Service provider.
APN
Enter the APN - Check with 3G Service provider.
Dial Number
Enter the dial number e.g: *99#, #777 etc. as per ISP.
User Name
Enter username – Check with 3G service provider.
Password
Enter password – Check with 3G service provider.
Connection type
Persistent means Automatic dial & Manual means manual dial.
Idle time
Please set the time in minutes if connection type is manual
mode.
NAPT
Enable/Disable Network Address Port Translation.
Default Route
Enable/ Disable default route.
MTU
Set Maximum Transfer Unit.Default value is 1500.
IP Type
Select IPv4 or IPv6 or Both.
3G
to
wired
switch time(s)
Set the time in seconds.
Note: WAN Fail over to 3G mode functions only when the RJ-45 WAN port is
physically down or the cable is unplugged.
To apply the changes, click on “
Apply Changes
”. To cancel the changes, click on
“
Reset
”.
