DG-BR1000Nu User Manual
116
3-3-1 Access Control
This function allows or denies computers with specific MAC addresses from
connecting to the network; it can also allow or deny computers with specific IP
addresses, protocols, or ports. Please click ‘Access Control’ menu on the left of web
management interface, under the ‘Firewall’ tab and the following message will be
displayed on your web browser
.
Here is the description of every setup item:
Parameter
Description
Enable MAC Filtering
Check this box to enable MAC address based
filtering, and please select ‘Deny’ or ‘Allow’ to
decide the behavior of MAC filtering table. If you
select ‘Deny’, all MAC addresses listed in filtering
table will be denied from connecting to the network;
if you select ‘Allow’, only MAC addresses listed in
filtering table will be able to connect to the network,
and rejecting all other network devices.
Client PC MAC address
Please input the MAC address of the computer or the
network device here, dash (-) or colon (:) are not
required. (i.e. If the MAC address label of your
wireless device indicates ‘aa-bb-cc-dd-ee-ff or
aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’
Computer Name
Click on the menu and all the computers connected
to the router will be listed here. You can easily select
