DG-BR1000Nu User Manual
110
require multiple connections. Select an application
from the Popular Applications selection and click ‘Add’
to auto fill the TCP/UDP Ports and Comment.
Add
Add the setting to the ‘Current Trigger-Port Table.’
Reset
Click ‘Reset’. This will clear all above settings and you
will have to reconfigure the unit again.
Current Trigger-Port Table All the settings for the special applications will be
listed here.
Delete
Please select a special application by clicking the
‘Select’ box of the mapping, then click ‘Delete’ button
to remove the setting. If there’s no setting here, this
button will be grayed out.
Delete All
Delete all settings existed in Current trigger port table.
Reset
Unselect all settings.
After you finish with all settings, please click ‘Apply’ button and the following
message will be displayed on your web browser:
If you want to reset all settings in this page back to previously-saved value, please
click ‘Cancel’ button
Please click ‘Continue’ to go back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while the router is rebooting).
NOTE:
Only one LAN client can use a particular special application at a time.
