DG-BG4300N User Manual
7.2 UPnP Setup
The DSL device supports a control point for Universal Plug and Play (UPnP) version 1.0, and
supports two key features: NAT Traversal and Device Identification. This feature requires one active
WAN interface. In addition, the host should support this feature. In the presence of multiple WAN
interfaces, select an interface on which the incoming traffic is present.
With NAT Traversal, when an UPnP command is received to open ports in NAT, the application
translates the request into system commands to open the ports in NAT and the firewall. The
interface to open the ports is given to UPnP when it starts up and is part of the configuration of the
application.
For Device Identification, the application will send a description of the DSL device as a control point
back to the host making the request.
7.2.1 UPnP Configuration
Fields in this page:
Field
Description
UPnP Daemon
Enable/Disable UPnP feature.
Binded WAN Interface
Select WAN interface that will use UPnP from the drop-down lists.
