DG-BG4300N User Manual
Step 9
: Click ‘
Next’
to continue with the installation.
You can select
LLC
or
VC-Mux
as the encapsulation mode according to the uplink equipment or use the
default setting.
1483 Bridged
: If you select 1483 Bridged as the WAN protocol, you must use the third party
Dial-up software or Windows New Connection Wizard to configure the Internet dial-up access.
1483 MER
: If you select 1483 MER as the WAN protocol, the router obtains an IP address
automatically.
1483 Routed
: If you select 1483 Routed as the WAN protocol, you can not use the DHCP
service. You need to enter the IP address, subnet mask, default gateway and DNS that is
provided by your ISP.
PPPoE /PPPoA
: If you select PPPoE or PPPoA as the WAN protocol, click
Next
, and the
following page appears.
Step 10
: In this page, enter the correct user ID and password that is provided by your ISP.
After settings, click ‘
Next’
to continue with the installation.
