Connect the Power Supply Unit (PSU) to the socket
labelled ‘PSU’ on the rear of the Transmitter.
5.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
6
Page 06
Please read the instructions carefully prior to installation
DG258-2RX -
DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Installing your DigiSender®
continued...
Note:
Try to avoid positioning the Transmitter directly on top of other electrical devices as this could
lead to a poor picture.
What’s the
A/B
switch for?
The Contrast (A/B) switch is present to com-
pensate for differences in equipment set-ups.
If you experience a
poor picture after
installation is
complete, try
adjusting the
A/B setting.