Page 10
Please read the instructions carefully prior to installation
DG258-2RX -
DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Using your DigiSender®
Basic Functions
Turning the DigiSender® On and Off
To turn the DigiSender® On, press the power button on the front of the Transmitter and Receiver.
The
power button will light up blue to indicate that the unit is switched on.
To turn the DigiSender® Off, press and hold the power button on the front of the Transmitter and
Receiver for approximately 3 seconds.
Alternatively you can turn the units On and Off by pressing the power button on the DigiSender®
Remote Control.
Selecting the Input
To select Input 1 (the source device attached to DigiConnector™ 1) press the blue power button on
the front of the Transmitter once.
Input LED 1 will light up red to indicate that the unit is set to input 1.
To select Input 2 (the source device attached to DigiConnector™ 2) press the blue power button on
the front of the Transmitter a second time.
Input LED 2 will light up red to indicate that the unit is set to input 2.
Alternatively you can select the Input by pressing the button labelled ‘Input 1’ or ‘Input 2’ on the
DigiSender® Remote Control at the transmitting location.