manualshive.com logo in svg

DigiSender TV DG258-2RX, Installation Manual

Share
Download
DigiSender TV DG258-2RX Installation Manual Download Page 11

Page 11

Please read the instructions carefully prior to installation

Using your DigiSender®

Advanced Functions

DG258-2RX - 

DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers

AV

 INPU

T 

1

AV

 INPU

T 

2

REMOTE RELAY ANT

AUDIO/VIDEO ANT

IR

Changing the Audio/Video Channel

The  DigiSender®  HQ2RX  features  4  Audio/Video  Channels.  Each  of  these  Audio/Video  Channels 
slightly changes the frequency on which the DigiSender® HQ2RX operates. Because the Audio/Video 
Channel switch allows you to ‘fine tune’ the frequency on which your DigiSender® HQ2RX operates, 
it is possible to overcome most interference and reception troubles that may occur.

To change the Audio/Video Channel on your DigiSender® HQ2RX, simply change the position of the 
Audio/Video Channel slider switch to 1, 2, 3 or 4.

For your DigiSender® HQ2RX to function correctly it is very important that the Audio/Video Chan-
nel settings are the same on both the Transmitter and Receiver.

Changing the Remote Relay Channel

The DigiSender® HQ2RX combines our advanced DigiEye™ technology with the IR Systeme Tech-
nik™ Remote Relay kit and features 4 digital Remote Relay Channels.

To change the Remote Relay Channel on your DigiSender® HQ2RX, simply change the position of the 
Remote Relay Channel slider switch to 1, 2, 3 or 4.

For your DigiSender® HQ2RX to function correctly it is very important that the Remote Relay 
Channel settings are the same on both the Transmitter and Receiver.

Summary of Contents for DG258-2RX





















Reviews:

No comments

Brands by name

Popular brands

Load more brands