Using the DigiPoS Retail Active 8000
13
Removing the Front Cover
You are sometimes required to remove the front cover of your DigiPoS Retail Active to
access the flash card bay and for hard disc maintenance. Follow the procedures below to
properly remove the front cover:
1 Close all open applications and turn off the Retail Active.
2 Insert the keys provided with the
package to unlock the keylock.
3 Turn the key to its unlock
position.
4 Grab both sides of the front panel to pull the cover as shown.
Removing the Top Cover
You are sometimes required to remove the top cover of your DigiPoS Retail Active to set
the COM port and cash drawer port voltages. Follow the procedures below to properly
remove the top cover:
*
Warning:
Be sure to turn the power off the Retail Active before proceeding.
1 Close all open applications and turn
off the Retail Active.
2 Disconnect all power and connecting
cables.
3 Unscrew the two screws on the rear
side of the Retail Active (A).
4 Slide the top cover towards its rear
side to unlock the catch (B).
5 Lift the top cover.
RETAIL A
CTIVE
RETAIL A
CTIVE
A
B
