Digiplex LED Keypad 11
n
5.6 One-Touch Keys
Your installer can program your system to respond to certain features
with the touch of a key. You will then access these features without
using your User Access Code by pressing and holding the desired
key. To do so, press and hold the following keys.
For more information concerning these features, please refer to their
respective sections.
5.7 Keyswitch Arming
Your installer can add a keyswitch to arm and disarm your system.
Your installer can program the keyswitch to arm in Regular, Stay,
Force or Instant mode. In addition, the keyswitch can act as a
Maintained or Momentary keyswitch.
5.7.1 Maintained Keyswitch
To arm the system, place in the “ON” position.
To disarm the system, place in the “OFF” position.
5.7.2 Momentary keyswitch
To arm the system, place it in the “ON” position briefly then place it
back in the “OFF” position. Repeating this process will disarm the
system.
• The [
ARM
] key to Regular Arm an area.
• The [
DISARM
] key to disarm a Stay/Instant armed area.
• The [
STAY
] key to Stay Arm an area.
• The [
FORCE
] key to Force Arm an area.
• The [
BYP
] key to access Bypass Programming.
• The [5] key to Instant Arm an area.
• The [6] key to modify the backlight.
DGP2648_EU08.fm Page 11 Friday, September 29, 2006 2:43 PM
Summary of Contents for DGP2-648BL
