22
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
Lens shroud
Up/down position
Horizontal direction
Horizon alignment
1.
Gently lift the lens shroud off the camera assembly to remove it from the camera.
2.
While observing video from the camera, set the horizon alignment by rotating camera module bracket on its horizontal axis
(direction the lens is pointed).
3.
Set the horizontal direction of the video frame by rotating camera assembly on its vertical axis.
4.
Set the up-down position of the video frame by point the lens up or down.
5.
If necessary, make additional adjustments to these settings to perfect the frame of the video.
6.
Reinstall the lens shroud
7.
Reinstall the camera dome.
2.8.2 Focus
The lens focus is set at the factory and requires no further adjustment.
CAUTION
If a camera with a high zoom lens is subjected to a temperature variation of about 18˚F or more, a change of focus may
occur. Make sure to consider the environment when installing a camera with a high zoom lens.
2.8.3 Image quality adjustments
Adjustments to the image brightness, contrast, hue, saturation, and sharpness are performed through the web browser:
1.
From the VIEW window, click:
SETUP
>
Video & Audio
>
Video-In
