12
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
Check the list of IP devices found by IPAdmin Tool. You can identify your camera by the MAC address. If the camera was not
found, click the
Refresh
button every minute until your camera appears in the list.
3.
In the IPAdmin Tool device list, use the camera’s MAC Address to find the camera you are installing. After finding the camera,
right click the entry, then select IP Address from the drop-down list. An IP Setup window will open.
4.
In the IP Setup window, click the
Static
option bullet to select this option.
Static
Option
