Digimerge DHU500, Installation Manual

Page: 29 / 62

Revision 1.0 29
Recording Set
SECTION 4
Recording Set
Global Parameters
Settings for General Parameters.
1. AUDIO # REC : Turns Audio recording ON/OFF. press the
K
and
L
buttons to highlight, and
press the
←→
buttons to change to ON/OFF. 4CH model does not have extended menu as above.
2. REPEAT RECORDING: Allows the DVR unit to repeat recording. To change the setting, press
the
K
and
L
buttons to highlight, and press the
←→
buttons to change to ON/OFF.
3. WATERMARK EMBEDDING : Adds Watermarking to the recorded event. Press the
K
and
L
buttons to highlight, and press the
←→
buttons to change to ON/OFF.
4. RECORDING RESOLUTION: Sets the Recording Resolution for events. To change the
Resolution, press the
K
and
L
buttons to highlight, and press the
←→
buttons to change to
either 720x240 or 360x240.
5. SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons
to highlight, and press the SEL button to accept the changes.
Normal Recording
Controls the settings for Manual Recording.
1. CH1~4 FRAMERATE: Set the number of Frames
Per Second. Press the
K
and
L
buttons to highlight,
and press the
←→
buttons to set the FPS between
0~15 Seconds.
2. QUALITY : Set the quality level for the recording to
High, Mid or Low
3. SAVE & EXIT : Saves any changes made, and exits to the Main Menu. Press the
K
and
L
buttons
to highlight, and press the SEL button to accept the changes.
Global Parameter Audio 1 Rec:
Audio 2 Rec:
Audio 3 Rec:
Audio 4 Rec:
Repeat Rec:
Watermark Emb
Rec Res
Save & Exit
OFF
OFF
OFF
OFF
ON
ON
720 x 240
Normal Recording
CH1 Frame Rate:
CH2 Frame Rate:
CH3 Frame Rate:
CH4 Frame Rate:
CH1 Recording Quality
CH1 Recording Quality
CH1 Recording Quality
CH1 Recording Quality
Save & Exit 15 FPS
15 FPS
15 FPS
15 FPS
HIGH
HIGH
MED
LOW