CONTROL - REAR PANEL
:
-4-
1. LAN
Connect the RJ45 standard pass through cable to the internet, or directly to a PC using
the crossover cable
2. ACT & LINK LED’s (Actual & Link)
When these LED’s are blinking it indicates that the network is in operation
3. VIDEO INPUT (BNC, 2 channels)
Connect to a video source, such as a camera or DVR video output.
4. ALARM I/O (optional for advanced applications)
Connect control devices, such as a DVR, Motion Sensors, external
alarm signal inputs, etc
5. POWER
Plug in the supplied power adaptor (12V ).
RESET BUTTON (at the bottom of the Video Web Server)
Push this button for more than 5 seconds to reset the setting back to the default
setting.
BOTTOM PANEL :
3
Bottom
1 2 3
4 5
