Digilock NEXTLOCK CUE Series, Manual

Page: 9 / 42

Key Managed
Latch Mechanism
Product Guide
CUE keypad locks with a deadlatch are designed to operate for assigned use applications. In assigned use functionality, the user is
assigned a specific locker and a 4-digit code or User Key to operate the lock. A Programming Key unique to the lock system programs
up to 25 Manager Keys to the locks for management access, external power, and inspection.
Lock Parts
Front Unit
C Button Key Button
Key Slot
Alpha Numeric
Keypad
1 2 3
4 5 6
7 8 9
C 0
LED Usage Indicator
Rear Unit
Cover Plate
Lock Mounting Holes
1/2" (12.7 mm) Deadlatch
Cover Plate Screws
User Key Manager Key* Programming Key**
Operates the lock
• • •
Overrides user access
• •
Allows management inspection
• •
Provides external power
• •
Registers Manager Keys
•
Assigns user credential
•
*Up to 25 Manager Keys may be registered to each lock **1 Programming Key allowed per lock group.
Keys
Next logo must face left.
Key Insertion
Initial Setup
New locks operate with
=`
. Locks must be setup to allow full operation.
a.
Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns on.
b.
Touch each Manager Key to the key slot. A two-tone beep will be heard for each Manager Key that is successfully registered.
c.
Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d.
Repeat above steps for each lock or follow Express Register Manager Key(s) instructions to setup all locks.
Express Register Manager Key(s)
The Programming Key can quickly register the same Manager Key(s) to operate multiple locks.
a.
Go to the lock registered with the Manager Key(s).
b.
Press
=`66`
. The LED will turn on.
c.
Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d.
At each lock to be registered, touch the Programming Key to the key slot until a two-tone beep is heard and the LED flashes once to
indicate successful registration.
e.
End express registration,* go to any registered lock and press
=`
then touch the Programming Key to the key slot to operate the lock.
* The Programming Key will continue to function in express registration mode until it is used to operate a lock.