Digilock NEXTLOCK CUE Series, Manual

Page: 15 / 42

Code Managed
Bolt Mechanism
Product Guide
Assign User Code (for assigned use functionality only)
Make sure that the lock is set for assigned use functionality. Once a User Code is assigned, the previously assigned User Code will no
longer operate the lock.
Assign a User Code (default User Code =
1234
):
a.
Press
=`
[Manager Code]
`
. A two-tone beep will be heard and the LED will turn on.
b.
Press
=
[new User Code]
`
. A two-tone beep will be heard.
c.
To confirm, press
=
[the same new User Code]
`
. Two sets of two-tone beeps will be heard and the LED will turn off.
Operating Instructions
Operate with a User Code
For assigned use functionality
:
▪
To unlock: Press
=
[assigned 4-digit code]
`
*.
▪
To relock: Press
=``
.
For shared use functionality
:
▪
To lock: Press
=
[any 4-digit code]
`
.
▪
To unlock: Press
=
[the same 4-digit code]
`
*.
Operate with a Registered Manager Code
▪
To lock and unlock: Press
=
[Manager Code]
`
**.
Operate with a Registered Owner Code
▪
To lock and unlock: Press
=
[Owner Code]
`
**.
* The lock will go into “Sleep Mode” (keypad is disabled for 1 minute) after 3 consecutive incorrect entries.
** If the Owner Code or Manager Code is used to unlock and then relock, the previous User Code will continue to operate the lock.