Keypad Interface
Flex Key Managed - E Function
Shared Use Functionality
Product Guide
Programming Instructions
2
Add Manager Flex Keys
At least one Manager Flex Key is required for the lock system. For additional Manager Flex Key(s) contact Digilock Sales.
Replace Manager Flex Keys
Replacement Manager Flex Key(s) must be purchased and registered to the lock(s) to prevent lost/stolen Manager Flex Key(s) from accessing a
lock. All remaining Manager Flex Key(s) must also be replaced as they “match” the lost/stolen Manager Flex Key.
Note the order or serial number (found on the lock’s rear unit).
Collect all remaining Manager Flex Key(s).
Contact Digilock Support to purchase any additional copies of your
Manager Flex Key - “Replacement Key”.
Upon receipt, touch one replacement Manager Flex Key to the key
slot until a two tone beep is heard.
If multiple Manager Flex Keys operate the lock(s), only one
replacement Manager Flex Key is required to be registered as they
all “match”.
Repeat above step for each lock. All previously registered Manager
Flex Keys will no longer operate the lock; discard/destroy them.
Note the order or serial number (found on the lock’s rear unit).
Collect all remaining Manager Flex Key(s).
Contact Digilock Support to purchase any additional copies of your
Manager Flex Key - “Match Previous”
Upon receipt, no additional programming is required. The
additional Manager Flex Key(s) “match” the Manager Flex Key(s)
already registered to operate the lock(s).
1
1
3
2
2
4
