DAR1-APS1 & DAR1-APV1
Phone: 707 766 6000
www.digilock.com | [email protected]
RFID Locks Advanced Security
Assigned Use
Product Guide
Operating Instructions
Operate with the assigned User Key:
०
To unlock: Touch the assigned User Key to the key slot. The latch will retract for approximately 6 seconds to
allow the door to be opened.
०
To lock: Close the door.
Operate with a registered Manager Bypass Key:
०
To unlock: Touch a registered Manager Bypass Key to the key slot. The latch will retract for approximately 6 seconds to allow
the door to be opened.
०
To lock: Close the door.
Operate with the Programming Key:
०
To unlock: Press
`
, then touch the Programming Key to the key slot. The latch will retract for approximately 6 sec onds to
allow the door to be opened.
०
To lock: Close the door.
Operate with the assigned RFID Card:
०
To unlock: Press
`
then present the assigned RFID Card to the Reader. The latch will retract for approximately 6 seconds
to allow the door to be opened.
०
To lock: Close the door.
*Once a User Credential is assigned, the previous User Credential will no longer operate the lock.
a.
Press and hold
`
for 5 seconds until a two-tone beep is heard and the LED starts to flash.
b.
Touch a registered Manager Bypass Key to the key slot until a two-tone beep is heard and the LED turns on.
c.
Touch any User Key to the key slot until two sets of two-tone beeps are heard and the LED turns off.
Assign a User Key
Assign User Credential (RFID Card or User Key)*
Assign an RFID Card
a.
Press and hold
`
for 5 seconds until a two-tone beep is heard and the LED starts to flash.
b.
Touch a registered Manager Bypass Key to the key slot until a two-tone beep is heard and the LED turns on.
c.
Present an RFID Card to the Reader until two sets of two-tone beeps are heard and the LED turns off.
