Micro - Fibre Optic Lightsource
User Manual
1.0 - 6 August 2021
Page 2 of 5
+617 3899 1267
Table Of Contents
Notes
•
Install in a dry sheltered position
•
Interior use only
•
Ensure adequate ventilation
•
Installation should only be performed by a qualified professional
•
Install in accordance with all appropriate wiring standards
•
TYPE Y ATTACHMENT: If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged. It shall be exclusively replaced by the manufacturer or his service agent or a
similar qualified person to avoid a hazard.
•
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer
than 0.33 m is not expected.
•
Lightsource is not mains dimmable.
Introduction
A range of small, quiet fibre optic light sources powered by LED technology. Manufactured from durable
ABS and supplied as standard in a black finish. White and grey enclosures are available to special order. This
light source range utilises a white light LED array and is suitable for use with either glass or PMMA fibre. An
inbuilt decorative wheel allows for the creation of twinkling and/or colour change effects. These light
sources are also dimmable. Manual control is provided for dimming and varying the effects wheel speed.
