3
D7 (7)
4
SPI_CS ()/UART_RTS/PWM1 (P4)
5
D6 (6)
6
SPI_CLK/UART_CTS (P3)
7
D5 (5)
8
SDI/SDO/UART_TX (P2)
9
D4 (4)
10
SDI/SDO (P1)
11
D3 (3)
12
INT ()/CLK2 (C2)
13
D2 (2)
14
DO10 (10)
15
D1 (1)
16
DO9 (9)
17
Trigger Input (T1)
18
Trigger Output (T0)
19
GND () (↓)
20
GND () (↓)
21
AWG1 (W1)
22
INT ()/CLK1 (C1)
23
DC Output 1 (V1)
24
DC Output 2 (V2)
25
GND () (↓)
26
GND () (↓)
27
AI2+/OSC2 (2+)
28
GND ()/AI2- (2-)
29
AI1+/OSC1 (1+)
30
GND ()/AI1- (1-)
(https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/openscopemz_walk_around.png?id=reference%3Ainstrumentation%3Aopenscope-
mz%3Areference-manual)
OpenScope MZ uses the ADC () on the PIC32MZ to create a 2 channel oscilloscope with 12-bits of resolution per channel. Each channel has a pair of analog inputs
with a PWM output to facilitate the interleaving of the two inputs, one PWM to handle the input offset voltages, and one DMA channel at the second highest priority
to transfer the measured data.
Walk Around the Board
Oscilloscope
