10-bit resolution
1 Hz () to 1 MHz () frequency
3 V pk2pk output with ±1.5 V offset
20 mA output current
25000 sample buffer size
The OpenScope MZ has 10 user IO pins that are shared between the Logic Analyzer and as digital input/output pins. A DMA channel shared with the AWG at the
highest priority level is used to transfer data received by the PIC32MZ.
(https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/io_pins.png?id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual)
10 Channels multiplexed between the Logic Analyzer and as general purpose IO
3.3V CMOS logic
7 mA source and 12 mA sink when used as GPIO ()
Logic Analyzer has a sample rate of 10 MS/s ()
Maximum buffer size of 32640 samples per channel for the logic analyzer
Pins DIO0-DIO3 are 5V tolerant, pins DIO4-DIO9 are not 5V tolerant
OpenScope MZ has two DC outputs that are driven by their own PWM output with a single PWM line for the DC offset. A gain circuit is implmented on the
OpenScope MZ to provide a voltage range of -4 V to 4 V for each channel. A feedback circuit is also present to allow for calibration of the DC output.
(https://reference.digilentinc.com/_detail/reference/instrumentation/openscope-mz/dc_output_main.png?id=reference%3Ainstrumentation%3Aopenscope-mz%3Areference-manual)
Digital I/O
DC Power Supplies
