D i g i g r a m
22
IN/OUT selection (ES220-L only)
5
IN/OUT selection
(ES220-L only)
This jumper defines whether the ES220-L injects two audio channels into the
EtherSound stream (mode “IN”, jumper OFF) or whether it plays two
channels provided by the EtherSound stream (mode “OUT”, jumper ON).
End of bi-directional loop
6
End of
bi-directional loop
This jumper is only taken into account if the rotary switches are positioned
between 01 and 64. Otherwise, this parameter setting is done remotely by
control software.
With this jumper ON, the ES220 or ES220-L is defined ‘end of bi-directional
loop’. In this case the ES220 transmits the descending stream (“downstream”)
to the following equipment, but it also sends the same stream to the
equipment upstream, provided that it is the last device of the bidirectional
chain. Several consecutive devices of a bi-directional chain may have this
jumper in place. In this case, the bi-directional chain ends at the last device
having this jumper ON.
Audio extraction (downstream/upstream)
4
Audio
extraction
("downstream/upstream")
With this jumper ON, the ES220 (or ES220-L in mode “OUT”) plays back the
two channels extracted from the ascending stream; if this jumper is removed,
the two channels are extracted from the descending stream.
This jumper is only taken into account if the rotary switches are positioned
between 01 and 64.
