D i g i g r a m
10
Serial port (RS232 on DB9)
ES881v
S232 male port on the rear panel. Use this port to
con
t
Note:
nt requires specific software.
EtherSound network; for
the
ES881v2, ES1241v2, and ES16161v2 may also be managed through configuration software edited by
development partners.
he Windows Control Panel.
ay then become necessary to upgrade your devices. In
this case please refer to the respective documentation provided with the firmware upgrade tool.
2, ES1241v2, and ES16161v2 dispose of a serial R
nec any compatible device. For pinout allocation details, please refer to the figure and table above.
The RS232 serial port manageme
Remote set-up by means of configuration software
Use of the configuration software allows for the management of all devices on the
software details, please refer to the on-line help file.
ES881v2, ES1241v2, and ES16161v2 are shipped with a CD-ROM containing the EtherSound driver and
Digigram configuration software, EScontrol. To install this software, please refer to the CD-ROM delivered
with your EtherSound device.
Digigram
To uninstall the software go to Add/Remove programs in t
Firmware update
Digigram may decide to publish firmware updates. It m
Pin # Description
1
not connected
2
RxD (received data)
3
TxD (transmitted data)
4
not connected
5
signal ground
6
not connected
7
RTS (request to send)
8
CTS (clear to send)
9
not connected
