Page 14
5.4
TEMPERATURE
The temperature can be shown on the BASIC/ADVANCED/NAVIGATION Display screen.
Press the right arrow key
to switch between the functions. In sequence the following
values are shown:
Temperature / Pressure / Air Speed
The ambient temperature reading can be shown in metric (°C) or imperial (°F) units. To
change the units of display, go to the main setup menu page by pressing the
key
(function “MEN”), select the “MAIN SETUP” menu and go (M-SET \ n. 28 U-TE).
It is possible to adjust the temperature indication, go to (MAIN SETUP \ n. 29 KTMP).
Note: temperature sensor is inside the instrument and takes several minutes to reach
the external temperature. Differences in readings of about 1° or 2° are normal.
5.5
BAROMETER
The barometer can be shown on the BASIC/ADVANCED/NAVIGATION DISPLAY screen.
To display the barometric pressure press the
key.
To recalibrate the barometer, go to (M-SET \ n. 12 KBAR)
Attention: Incorrect re-calibration makes the readings of the barometer & the altimeters
less accurate.
5.6
TIME/CHRONOGRAPH
The Time/Chronograph function can be shown on the BASIC/ADVANCED/NAVIGATION
Display.
Press the key
TIME or
, CHRONO to switch between the functions.
To zero the chronograph, press the
key (long press).
Note: The chronograph is always set at zero when flight recorder starts.
To adjust the time and date, go to (M-SET \ n. 15 HOUR), (M-SET \ n. 16 MIN), (M-SET \
n. 17 DAY), (M-SET \ n. 18 MONT), (M-SET \ n. 19 YEAR).
5.7
PILOT NAME
To set the pilot name, go to (M-SET \ n. 20 PILO).
