Channel A / Channel B controller
Spin the left controller to control the input
gain level of channel A.
Spin the right controller to control the input
gain level of channel B.
If one channel is muted (see “Software” on page 17) increase that channels input gain to
unmute the channel.
Standby
To set the amplifier to standby mode, press
and hold the left controller for more than 3
seconds. Now the LCD screen displays “Go
to Standby?”. Press the right controller to
confirm, or the left controller to abort.
Presets
To enter the Preset menu press and hold the right controller for more than 3 seconds. Select
a preset by spinning this controller.
The amplifier features 13 presets:
• 0 = last used settings
• 1 = stereo mode
• 2 = bridge mode
• 3 = user preset 1
• 4 = user preset 2
• 5 = user preset 3
• 6 = user preset 4
• 7 = user preset 5
• 8 = user preset 6
• 9 = user preset 7
• 10 = user preset 8
• 11 = user preset 9
• 12 = user preset 10
Press the right controller to select the preset of your choice. To confirm press the right
controller again or press the left controller to abort.
In the DSPNET network software you can select which preset is used at start-up.