AT commands
I/O settings commands
XBee/XBee-PRO DigiMesh 2.4 RF Module User Guide
88
I/O settings commands
The following AT commands are I/O settings commands.
CB (Commissioning Pushbutton)
Use
CB
to simulate commissioning pushbutton presses in software.
Set the parameter value to the number of button presses that you want to simulate. For example,
send
CB1
to perform the action of pressing the Commissioning Pushbutton once.
Parameter range
0 - 4
Default
N/A
D0 (DIO0/AD0)
Sets or displays the DIO0/AD0 configuration (pin 20).
Parameter range
0 - 5
Parameter
Description
0
Disabled
1
Commissioning Pushbutton
2
ADC
3
Digital input
4
Digital output, low
5
Digital output, high
Default
1
D1 (DIO1/AD1)
Sets or displays the DIO1/AD1 configuration (pin 19).
Parameter range
0, 2 - 5
Parameter
Description
0
Disabled
