Getting started with the XBee Cellular Modem Development Kit
XBee Cellular Modem examples
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
19
4. On the Configuration toolbar, click the
Default
button
to load the default values
established by the firmware, and click
Yes
to confirm.
5. Factory settings are loaded but not written to the device. To write them, click the
Write
button
on the toolbar.
6. To switch to TCP communication, in the
IP
field, select 1 and click the
Write
button
.
7. To enter the destination address of the ELIZA Therapist Bot, in the
DL
field, type
52.43.121.77
and click the
Write
button.
8. To enter the destination IP port number, in the
DE
field, type
2328
and click the
Write
button.
9. Click the
Consoles working mode
button
on the toolbar to open a serial console to the
device. For instructions on using the Console, see
http://www.digi.com/resources/documentation/digidocs/90001458-
13/default.htm#reference/r_at_console.htm
10. Click the
Open
button
to open a serial connection to the device.
11. Click in the left pane of the
Console log
, then type in the Console to talk to the ELIZA Therapist
Bot. The following screenshot provides an example of this chat.
Connect to the echo server
This server echoes back the messages you type.
The following table explains the AT commands that you use in this example.
