Digi XBee Cellular LTE Cat 1, User Manual, Page: 57 / 91

AT commands Serial interfacing commands
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide 57
Parameter range
-
Default
0.0.0.0
Serial interfacing commands
The following AT commands are serial interfacing commands.
BD (Baud Rate)
Sets or reads the serial interface baud rate for communication between the device's serial port and
the host.
Parameter range
0x0 - 0xA (standard rates) 0x5B9 to 0x5B8D80 (non-standard rates up to 6 Mb/s)
Parameter Description
0x0 1200 b/s
0x1 2400 b/s
0x2 4800 b/s
0x3 9600 b/s
0x4 19200 b/s
0x5 38400 b/s
0x6 57600 b/s
0x7 115200 b/s
0x8 230400 b/s
0x9 460800 b/s
0xA 921600 b/s
Default
3 (9600 b/s)
NB (Parity)
Set or read the serial parity settings for UART communications.
Parameter range
0x00 - 0x02