Page | 16
Access the CLI (Command Line Interface) – this can be achieved:
Through the serial port @115200 bps
Via a telnet or SSH connection
Via the “execute a command” page of the web user interface.
Issue the “flashleds” command and check that all LEDs are illuminated. If there is an LED fault please
request an RMA with code:
“x LED failure” where x is:
ON LED
LAN
W/N
NET
SIM
DAT
Signal I
Signal II
Signal III
DTE
7
CHECK W-WAN CONNECTIVITY
7.1
Test SIM detection switch
With the router powered off, insert a SIM card into BOTH SIM slots of the WR41V1.
Access the web user interface of the WR41V1.
Click the button to load the Java Applet front panel display.
Verify that both SIMs cards are shown as populated as in the picture below:
Note that the currently active SIM card will be flashing.
If the sim cards are physically inserted but do not appear in the applet please request an RMA with
reason “SIM DETECTION FAIL”
